| The code | Description |
|---|---|
| 500 | Invalid JSON |
| 499 | Error ID format |
| 498 | Error Cmd format |
| 497 | Unknow rest Cmd |
| 496 | Error get data |
| 495 | Invalid argument |
| 494 | Not valid device password |
| 493 | Linked user not found |
| 492 | Ready linked |
| 491 | Invalid dev type |
| 490 | Device not found |
| 489 | Device not valid type |
| 488 | Demo device ready |
| 487 | Invalid device type |
| 486 | Invalid block |
| 485 | Invalid emu block |
| 484 | Device has owner |
| 483 | The device belongs to another user |
| 482 | Wrong way |
| 481 | Login has already been made |
| 480 | Invalid bookmark ID |
| 479 | Wrong version selected |
| 478 | The adapter is blocked by another user |
| 477 | The adapter is not locked |
| 476 | Adapter not connected |
| 475 | Adapter into bootloader mode |
| 474 | JSON value of parameter error |
| 473 | J2534 Not supported |
| 472 | J2534 Invalid channel ID |
| 471 | J2534 Invalid protocol ID |
| 470 | J2534 Null parameter |
| 469 | J2534 Invalid ioctl value |
| 468 | J2534 Invalid flags |
| 467 | J2534 Failed |
| 466 | J2534 Device not connected |
| 465 | J2534 Timeout |
| 464 | J2534 Invalid message |
| 463 | J2534 Invalid time internal |
| 462 | J2534 Exceeded limit |
| 461 | J2534 Invalid message ID |
| 460 | J2534 Device in use |
| 459 | J2534 Invalid ioctl ID |
| 458 | J2534 Buffer empty |
| 457 | J2534 Buffer full |
| 456 | J2534 Buffer overflow |
| 455 | J2534 Pin invalid |
| 454 | J2534 Channel in use |
| 453 | J2534 Error message protocol ID |
| 452 | J2534 Error filter ID |
| 451 | J2534 No flow control |
| 450 | J2534 Not unique |
| 449 | J2534 Invalid baudrate |
| 448 | J2534 Invalid device ID |
| 447 | J2534 Invalid Fivebaud inversion address |
| 446 | J2534 Invalid param of securiry access |
| 445 | J2534 Invalid lenght of security access |
| 444 | J2534 Internal error |
| The code | Description |
|---|---|
| 600 | Feature not supported. This error occurs when a function cannot be executed in the specified conditions. |
| 599 | Coefficient C1 cannot be equal to 0. Division by 0 |
| 598 | Unknown parameter |
| 597 | Stamp tree path not set correctly |
| 596 | Unknown ECU |
| 595 | ID out of range |
| 594 | Unknown tab |
| 593 | Error parse multi packet |
| 592 | Error parser unknown |
| The code | Description |
|---|---|
| 100 | Invalid command |
| 99 | Invalid address |
| 98 | ERR_BOOT_SRC_ADDR_ERROR |
| 97 | ERR_BOOT_SRC_ADDR_NOT_MAPPED |
| 96 | ERR_BOOT_DST_ADDR_NOT_MAPPED |
| 95 | ERR_BOOT_COUNT |
| 94 | ERR_BOOT_INVALID_SECTOR |
| 93 | Сектор не пустой |
| 92 | Sector not prepared for programming |
| 91 | The programmed data does not match the prepared |
| 90 | Flash busy |
| 89 | Parameters not set correctly |
| 88 | Invalid packet address. Packet transmission failed. |
| 87 | ERR_BOOT_ADDR_NOT_MAPPED |
| 86 | ERR_BOOT_CMD_LOCKED |
| 85 | ERR_BOOT_INVALID_CODE |
| 84 | ERR_BOOT_INVALID_BAUD_RATE |
| 83 | ERR_BOOT_INVALID_STOP_BIT |
| 82 | ERR_BOOT_CODE_READ_PROT_ENABLED |
| 81 | ERR_BOOT_INVALID_LEN |
| 80 | ERR_BOOT_INVALID_WRITE_PROCESS |
| 79 | Unable to open file |
| 78 | Unable to create file |
| 77 | Unable to read file |
| 76 | Unable to write to file |
| 75 | Not enough arguments |
| 74 | Unknown device type |
| 73 | Device not connected |
| 72 | The device is already connected |
| 71 | No data transfer |
| 70 | No data reception |
| 69 | Invalid package |
| 68 | Invalid CRC Package |
| 67 | Wrong key |
| 66 | No protocol set |
